Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

DT Swiss M 1900 SPLINE 25 29-inch Front
$194.00 - $207.00
Listen up all you seasoned all mountain riders out there, with your grazed calves and elbows! This wheel's for you. The lightweight M 1900 SPLINE 25 can withstand the toughest alpine trails. Its tubeless-ready rim has been tested by both professional mountain bikers on the trail and our experts in the lab. We've packed more than 20 years of expertise into the lightweight straight-pull hub to ensure that you'll be tearing up the trails for years to come with your M 1900 SPLINE wheels.
DT Swiss M 1900 SPLINE 30 29-inch Front
$207.00
Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.
DT Swiss XRC 1200 SPLINE 30 Front
$1,474.00
When you pair the latest ultra-light DT Swiss Ratchet System hubs with an XC-tuned 30mm internal-width carbon rim, you get a precision tool for XC domination. Its 28 bladed, high-end DT Swiss spokes and master wheel builder quality make the XRC 1200 SPLINE 30 extremely capable over gnarly roots and rocks, up climbs and down descents, all while more than light enough to gain an edge attacking out of tight switchbacks.
Stan's NoTubes Sentry S1
$210.00 - $289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
Roval Roval Control 29 Carbon 148
$1,200.00
It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
Origin8 Bolt Carbon MTB XC Wheelset 29-inch
$1,600.00
- Origin8 Bolt 24mm inner width T700 UD carbon tubeless ready hookless disc brake clincher - Origin8 Elite convertible MTB disc hubs with anti-bite Shimano cassette body featuring 6 pawl/54 point/6.6-degree engagement - 32 hole 15TA front/32 hole 12TA rear 6 bolt MTB disc hubs laced with straight pull Sapim CX-Ray spokes - Weight: 765g front/822g rear - ISO-Mountain certified and assembled in the USA - Width ID (mm): 24 - Axle: Thru 15mm - Thru 12mm - Rim Color: Blk - Rim Model: OR8 Bolt Carbon MTB XC - Hub Model: OR8 MT-1110 Elite MTB - O.L.D.: 100mm/142mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: 6B - Spoke Type: Sapim CX-Ray BK - Spoke Count: 32H - Wall: Dbl - Valve: PV - Type: Tubeless Compatible
DT Swiss XM 1501 Spline ONE 30 29-inch Front
$565.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires, it will eat up the roughest of descents you can throw at it and it'll climb to those trailheads with ease. The perfect size for demanding all-mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss H 1700 Spline 30 29-inch Front
$378.90
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
DT Swiss H 1900 SPLINE 30 29-inch Rear
$303.00
At a 30mm internal rim width, the H 1900 SPLINE 30 is what's considered the new All Mountain standard. And All Mountain it is: Without carrying too much of a weight penalty and rolling well on virtually any surface, it owns the mountain. At low pressures made possible by the wide rim and the resulting large tire volume, it finds grip where others fail, whether on loose ball-bearing climbs or root-infested off-camber gravity sections. We at DT Swiss have equipped the H 1900 SPLINE 30 to own the mountain for many years. Technologies like the patented Pro Lock mechanical nipple thread lock and meticulous wheel building technique (each signed by our pro builders) make it possible.
Specialized Roval Traverse SL Fattie 29 148
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Race Face Next R 29-inch Rear Wheel
$824.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
DT Swiss E 1900 SPLINE 30 29-inch Front
$207.00
Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.
Roval Roval Control 29 148
$650.00
When you think of lightweight XC wheels, aluminum probably doesn't come to mind. In reality, though, high-grade alloy wheels have all of the tremendous performance properties found in carbon, like light overall weight, durability, and resilience to impact. And when made with the right hands, they're perfect for competitive racers and everyday trail riders alike. The problem is that, while many carbon wheels can check these boxes with ease, most alloy wheels don't live up to these expectations. In the case of the Control 29 wheels, however, there’s finally an aluminum wheelset that's truly ready to race. What sets the Control 29 wheels apart is that they share many of the same advanced technologies as our carbon version, the Control SL. They adopt the same rim shape with a 25-millimeter inner width, extensive on-trail testing, and our Zero Bead Hook technology. Our Zero Bead Hook rim takes away the dated mountain wheel design known as a bead hook. This hook is the part of the rim that crests at the top, sitting several millimeters inward from the rim’s sidewall, and it catches the tire’s bead under its hook. We know this may not sound too bad, but the hook establishes a weak spot in the rim that's easily crushed or bent. Without a hook, a rim can be manufactured to much tighter tolerances and can be made lighter due to the hook not needing to be reinforced. For these wheels, this means that we're able to nearly equal the strength of carbon, while also making them lighter than many carbon wheels. More importantly, a Zero Bead Hook all but gets rid of the aforementioned weak spot in the rim that's plagued riders with flat spots and dents for decades. If you happen to be one of those riders that enjoys riding your four-inch travel XC bike like it’s a six-inch trail bike, you’re in luck. Our objective of low weight and reliability, at an accessible price, also carries into the Control 29 build. We hand-build each rim to our alloy hubs, which feature DT Swiss internals at the rear and a design that allows for the same spoke lengths at both front and rear, via perfectly tensioned DT Swiss Revolution J-Bend spokes and Pro Lock nipples. We fully support the art of hand-building and do so with our wheels, knowing that real people can catch things that a machine simply cannot. - Rim Type: Alloy clincher, 2Bliss Ready, Zero Bead Hook design - Rim Material: E5 high-strength alloy - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: Alloy body, 15mm thru-axle, 19 and 31mm OD end cap options included. - Rear Hub: CNC-machined alloy body, high-quality DT Swiss 360 internals, 148mm spacing, XD driver body. - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Total Wheelset Weight: 1690g
Whisky Parts Co. No.9 40w Front 29-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
DT Swiss H 1950 CLASSIC 25mm Front
$292.00
The H 1950 CLASSIC is the best possible wheel for any adventure, whether it's on narrow city streets, bumpy forest roads, or discovering what's at the end of the map. The technology of the H 1950 CLASSIC has been specifically developed for e-bikes and gives you the reliability and robustness you need when you're in the middle of nowhere. The 25mm rim width provides plenty of support, ensuring that whether you have an e-MTB, e-Urban, or a fully-loaded touring bike, the H 1950 CLASSIC will be your trusty companion.
Stan's NoTubes Arch CB7 29-inch Front
$679.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
DT Swiss XRC 1200 Spline 25
$1,185.00 - $1,633.00
The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.
DT Swiss EXC 1200 SPLINE 30 Front
$1,175.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 30 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.
Stan's NoTubes Arch MK3 29 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$2,020.00
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
Specialized Roval Traverse Fattie 29 148
$650.00
In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Stan's NoTubes Baron MK3 29-inch Front
$319.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Race Face Turbine 29-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Front
$950.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Whisky Parts Co. No.9 36w Front 29-inch
$725.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Page 1 of 1